Explosion Proof LED Light, Class 1 Division 2 Light 200W 300W 400W 500W 600W
Model No. CES-EX-BW Series

These explosion proof lamp are combination moudule design, excellent heat dissipation performance. From 200W to 600W, with high lumen LEDs, the luminous flux is up to 78000LM, can meet to the high canopy lighting.The input voltage can be optional AC100-277V orAC277-480V, 6KV surge protection. For the hazardous location enviroment, it suitable for use in Class 1 Division 2, Groups A, B, C and D. Acccordding to your project, anti-corrosion peformance is available.

Applications:
• Wastewater treatment, oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases are present.
• Applies to hazardous locations of Class 1 Division 2 with explosive gas atmosphere.

Warning：

CUL for Hazloc:

• SUITABLE FOR WET LOCATIONS;
• THIS LUMINAIRE IS ACCEPTABLE FOR OPERATION IN AMBIENT CONDITIONS NOT EXCEEDING 40°C;
• FOR SUPPLY CONNECTION, USE WIRES RATED FOR AT LEAST90°C;
• NO SERVICEABLE PARTS” OR “NO USER SERVICEABLE PARTS. DO NOT OPEN FOR CLEANING.;
• CAUTION - ″TO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINAIRE FROM THE SUPPLY CIRCUIT BEFORE OPENING. KEEP TIGHTLY CLOSED WHEN IN OPERATION.″;
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED;
• “CAUTION – RISK OF SHOCK” and “DISCONNECT POWER BEFORE SERVICING”.