Explosion Proof Linear Lighting, Explosion Proof LED Tube, Class 1 Division 2 Light (Economical)
Model No. CES-EX-LN-02PM Series

Power: 20W 30W 40W 50W 60W 70W 80W 90W 100W

Length: 0.3M, 0.6M, 0.9M, 1.2M, 1.5M

CESP LN-02PM series explosion proof linear lighting is more economical to replace the traditional explosion proof tube light, made of the alloy aluminum,good heat dissipation. 20Watt - 100 Watt Power. For the design, it is very elegent, small and available in length to get into very tight spaces. It suitable for use in Class 1 Division 2, Groups A, B, C and D hazardous location enviroment. For the cost, it more cost efficiency for your project.

Applications
• Wastewater treatment, oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases are present.
• Applies to hazardous locations of Class 1 Division 2 with explosive gas atmosphere.

Warning

CUL for Hazloc:

• SUITABLE FOR WET LOCATIONS;
• THIS LUMINAIRE IS ACCEPTABLE FOR OPERATION IN AMBIENT CONDITIONS NOT EXCEEDING 40°C;
• FOR SUPPLY CONNECTION, USE WIRES RATED FOR AT LEAST90°C;
• NO SERVICEABLE PARTS” OR “NO USER SERVICEABLE PARTS. DO NOT OPEN FOR CLEANING.;
• CAUTION - ″TO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINAIRE FROM THE SUPPLY CIRCUIT BEFORE OPENING. KEEP TIGHTLY CLOSED WHEN IN OPERATION.″;
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED;
• “CAUTION – RISK OF SHOCK” and “DISCONNECT POWER BEFORE SERVICING”.