Destription:

The Explosion Proof Linear Fixture series features is a 90 minute emergency backup battery in 12W designed for hazardous environments where Zone 1 and Zone 2 with explosive gas atmosphere or explosive dust atmosphere may be present.

This battery backup lighting fixtures made of the die-cast aluminum and the PC cover. Good heat, and 6J impact resistance.
Installation: pendant, ceiling, pole or more customized.

Adopt to the high light-efficacy LED source, up to 140lm/W, the CCT is 2700K, 3000K, 4000K, 5000K, 5700K, 6500K optional, no flicker, no glare.

The electrophoresis technology and the multiple coats of marine anti-corrosion paint, the all the mounting brackets and accessories are made of 316 stainless steel, UL1598A anti-corrosion standard can for marine location.

If you need UL844 certified of the North American, please visit to Class 1 Division 2 emergency lights.

ATEX: EN IEC 60079-0-2018; EN 60079-7-2015; EN 60079-18-2015; EN 60079-31-2014;
IECEx: IEC 60079-0-2017; IEC 60079-7-2015; IEC 60079-18-2014; IEC 60079-31-2013;

IECEx & ATEX :

• “CAUTION-USEFASTENER WITH YIELD STRESS ≥ 640 MPa”；
• “WARNING – DO NOT OPEN WHEN ENERGIZED”；
• “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”；
• “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”；
• " WARNING - DETAILED TEMPERATURE CLASS - SEE INSTRUCTIONS”；
• “THE FLAMPROOF JOINTS ARE NOT INTENDED TO BE REPAIRED”;
• End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose；
• External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG；
• Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 130℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. The branch point is 83.6℃ and cable entry point is 69.4℃