400W Explosion Proof LED Floodlight - Zone 1 Zone 21

400W High Power Explosion Proof LED Flood Light - Zone 1 Zone 21 Hazardous Area

 

Applications:
• Wastewater treatment，oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.
• Applies to hazardous locations of Zone 1 and Zone2 with explosive gas atmosphere.
• Applies to hazardous locations of Zone 21 and Zone22 with explosive dust atmosphere.

ATEX: EN 60079-0: 2013 ; EN 60079-7: 2015 ; EN 60079-18: 2015 ; EN 60079-28: 2015 ; EN 60079-31：2014;

 

Warning：

  • “WARNING – DO NOT OPEN WHEN ENERGIZED”
  • “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”
  • “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”
  • End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose.
  • External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG.
  • Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 95℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally.

 400W explosion proof led lights

Features

  • Industry-leading efficacy: up to 130lm/W±5
  • -40°C to +55°C Ambient operating temperature
  • Amounting: U-bracket
  • Wide optics for uniform illumination
  • 5 years warranty
  • Entry Size: M25Χ1.5 or NPT 3/4”-14
  • Housing –Aluminum alloy (ADC12 )
  • Lens – tempered glass
  • Beam angle: 120°

Parameters

  • Power:2*200W
  • Input voltage: AC100-240/277V, 50/60Hz
  • Power factor: 0.97
  • Lumen flux: 52000lm
  • CCT: 2700K - 6500K (Optional)
  • LEDs: 3030
  • LED Driver: Meanwell HLG series
  • Dimension: 800mm x 800mm x 248mm
  • Weight: 21KG

Certificate & Standard

Have certified CES-J fixtures with the IECEX and ATEX standards for hazardous location and environments.

ATEX:
  • EX II 2G Ex eb mb op is IIC T4 Gb
  • EX II 2D Ex op is tb IIIC T95°C Db
  • IP66
  • Certify No：IEP 19ATEX 0714
IECEx:
  • Ex ec IIC T4 Gc
  • IP66
  • Certify No：IECEx UL 18.0046

Special order

  • Special Orders- Requirements
    Contact us for special requirements
    Tel: +86-755-83509822
    Fax: +86-755-83509868
    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Published in Explosion proof LED Flood Light

1 comment

  • Comment Link Daniel Auka Tuesday, 17 October 2023 10:30 posted by Daniel Auka

    Kindly I am asking for a quote with below specification or something similar,

    Power-400 Watts.
    Input Voltage AC 240V, Frequency 50HZ Product complied with: CE(EU).,CE(LVD),IEC,RosHS IP65,IES,LM80.
    LED SMD Chip: High power Philips 5050 chips 384 pcs.
    Cover material: High pressure Die-casting Aluminium, corrosion resistant coating.
    Implement of Reflect: Made of high purity aluminium.
    Heat sink: Yes.
    Light luminous efficiency: >120lm/Watt.
    Chip luminous efficiency: >140lm/Watt.
    Light luminou efficiency: >120lm/Watt LED Luminous Efficiency: >90%. NB- Supply cable entry must be at the bottom of the fitting.


    Regards
    Daniel

Send Your Iquiry

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.

back to top