Key Benefit
- High Efficacy low decay SMD LED chip,up to 140lm/w @350ma, rated life span 100,000 hrs.
- High heat transmitting die cast housing with ADC12 aluminum, patented design, IP67 protection grade
- Shock and vibration resistant tempered glass, super clear 95% light transmit rate
- Anti-glare.Scientific optical reflector design, making the light more focus,even, comfortable for eyes
- Meanwell HLG series driver, the highest lever of Meanwell driver
- Surface treatment-Powder coating with Epoxy Polyester, salt resistant and chemical resistant, patented arc shape heat sink design, to prevent the dust from accumulating on the surface
- 2.0mm thick aluminum PCB with heat index 2.5, keep LED working under normal temperature
- EMC test standard, Total harmonic distortion (THD)<10%, minimize the impact towards electric system
Features
- Industry-leading efficacy: up to 140 lm/W
- -40°C to +40°C Ambient operating temperature
- Wide optics for uniform illumination
- 5 years warranty
- Entry Size: NPT 3/4”-14 ;
- Housing –Aluminum alloy (ADC12 );
- Lens – tempered glass
- Beam angle: 140° * 80°
- Dimension: 400x250x65mm
- Weight: 5.5kg
Parameters
- Power: Max 40W
- Input voltage: AC100-240/277V, 50/60Hz
- Power factor: 0.97
- Light efficacy: 120 - 140lm/W
- CCT: 3000K/4000K/5000K/5700K/6500K
- LEDs: 3030
- LED Driver: Meanwell HLG series
Certificate & Standard
Have certified CES-L fixtures with the NEC and CEC standards for hazardous location and environments
- Class I, Division 2, Groups A, B, C and D
- T-Class: T6
- Damp and wet locations
- Certificate No：E475887
Mounting
Versatile mounting options:
- Pole mount
How to install this explosion proof street light?
A.The mounting height around 12m (For example:150W), cantilever length of not more than a quarter of the mounting height , and the elevation should not exceed 15 °
B.Installation Step：
- Place the lamp cord into the pole
- Insert the lamp into the pole
- Adjust the lamp direction and fix screw into lock position
- Fixthe screw into lock position，the torque applied to the screw is 1.08 kg.m
- The size of cavity inserted into the junction box should not be more than 80mm*40mm*40mm
Seal the gaps between the power driver lid and the plate tightly with silicone glue.