ATEX Explosion Proof LED Low Bay Light  - 240W 260W 280W 300W

The CES-EX-D-GBX Series is a line of explosion-proof LED high bay lights designed for use in hazardous locations, specifically Zone 1 and Zone 2 areas. These lights are ATEX-approved, which indicates they meet the safety standards set forth by the European Union for equipment to be used in potentially explosive atmospheres.

Explosion-Proof Design: These LED high bay lights are designed to prevent the ignition of hazardous gases, vapors, or dust in the surrounding environment. This is crucial in industrial settings where explosive materials may be present.

Various Wattage Options: The series offers a range of wattage options, including 240W and 300W. This allows you to choose the appropriate level of illumination for your specific application.

ATEX Approved: ATEX (Atmosphères Explosibles) is a certification that ensures equipment is suitable for use in explosive atmospheres. This approval indicates that the lights have met the necessary safety standards for such environments.

ATEX Explosion Proof LED Low Bay Light  - 120W 150W 180W 200W

The CES-EX-D-GBX Series is a line of explosion-proof LED high bay lights designed for use in hazardous locations, specifically Zone 1 and Zone 2 areas. These lights are ATEX-approved, which indicates they meet the safety standards set forth by the European Union for equipment to be used in potentially explosive atmospheres.

Explosion-Proof Design: These LED high bay lights are designed to prevent the ignition of hazardous gases, vapors, or dust in the surrounding environment. This is crucial in industrial settings where explosive materials may be present.

Various Wattage Options: The series offers a range of wattage options, including 150W,180W, and 200W. This allows you to choose the appropriate level of illumination for your specific application.

ATEX Approved: ATEX (Atmosphères Explosibles) is a certification that ensures equipment is suitable for use in explosive atmospheres. This approval indicates that the lights have met the necessary safety standards for such environments.

ATEX Explosion Proof LED Light  - 70W 80W 100W

The CES-EX-D-GBX Series is a line of explosion-proof LED high bay lights designed for use in hazardous locations, specifically Zone 1 and Zone 2 areas. These lights are ATEX-approved, which indicates they meet the safety standards set forth by the European Union for equipment to be used in potentially explosive atmospheres.

Explosion-Proof Design: These LED high bay lights are designed to prevent the ignition of hazardous gases, vapors, or dust in the surrounding environment. This is crucial in industrial settings where explosive materials may be present.

Various Wattage Options: The series offers a range of wattage options, including 70W, 80W,100W, and 120W. This allows you to choose the appropriate level of illumination for your specific application.

ATEX Approved: ATEX (Atmosphères Explosibles) is a certification that ensures equipment is suitable for use in explosive atmospheres. This approval indicates that the lights have met the necessary safety standards for such environments.

ATEX Explosion Proof LED Light  - 30W 40W 50W

The CES-EX-D-GBX Series is a line of explosion-proof LED high bay lights designed for use in hazardous locations, specifically Zone 1 and Zone 2 areas. These lights are ATEX-approved, which indicates they meet the safety standards set forth by the European Union for equipment to be used in potentially explosive atmospheres.

Explosion-Proof Design: These LED high bay lights are designed to prevent the ignition of hazardous gases, vapors, or dust in the surrounding environment. This is crucial in industrial settings where explosive materials may be present.

Various Wattage Options: The series offers a range of wattage options, including 30W, 40W, 50W, and 60W. This allows you to choose the appropriate level of illumination for your specific application.

ATEX Approved: ATEX (Atmosphères Explosibles) is a certification that ensures equipment is suitable for use in explosive atmospheres. This approval indicates that the lights have met the necessary safety standards for such environments.

Zone 21 Explosion Proof LED Light  - ATEX IECEx - 30W 40W

Applications

Wastewater treatment，oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall, and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.

Standard :
ATEX: EN IEC 60079-0-2018; EN 60079-7-2015; EN 60079-31-2014;
IECEx: IEC 60079-0-2017; IEC 60079-7-2015; IEC 60079-31-2013;

Warning：

IECEx& ATEX :

• “WARNING – DO NOT OPEN WHEN ENERGIZED”；
• “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”；
• “WARNING – Potential Electrostatic Charging Hazard –Please wipe with a damp cloth when cleaning”;
• End user shall use a certified cable gland suitable type of protection for final installation purpose；
• External earthing wire shall be connected when used and the cross-sectional area shall be more than 4mm² or 10AWG；
• Under rating conditions, the maximum temperature on the luminaire’s shell shall not be higher than 130℃ for T4. Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. For CES-EX-GB-02-30、CES-EX-GB-02-40，The branch point is 57.3℃ and the cable entry point is 52.3℃.

Zone 21 Explosion Proof LED Light  - ATEX IECEx - 60W 80W

Applications

Wastewater treatment，oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall, and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.

Standard :
ATEX: EN IEC 60079-0-2018; EN 60079-7-2015; EN 60079-31-2014;
IECEx: IEC 60079-0-2017; IEC 60079-7-2015; IEC 60079-31-2013;

Warning：

IECEx& ATEX :

• “WARNING – DO NOT OPEN WHEN ENERGIZED”；
• “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”；
• “WARNING – Potential Electrostatic Charging Hazard –Please wipe with a damp cloth when cleaning”;
• End user shall use certified cable gland suitable type of protection for final installation purpose；
• External earthing wire shall be connected when used and the cross-sectional area shall be more than 4mm² or 10AWG；
• Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 130℃ for T4. Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. For CES-EX-GB-02-60、CES-EX-GB-02-80，The branch point is 58.2℃ and cable entry point is 52.6℃；

Marine Lighting | Corrosion Prevention | Explosion Prevention |  Zone 1 Zone 21 | 100W 120W 150W 180W 200W |

CESP marine-grade lights comply with China Classification Society (CCS) standards and have obtained UL1598A marine certificate. They can be used for the most demanding exterior lighting marine environments, including sea bridges, offshore drilling platforms, ships, seaside refineries, seaside shipyards, docks, or other acid rain, seawater and salt spray corrosive environments.

Explosion-proof standard:

Applies to hazardous locations of Zone 1 and Zone2 with explosive gas atmosphere, and hazardous locations of Zone 21 and Zone22 with explosive dust atmosphere.

ATEX: EN IEC 60079-0-2018; EN 60079-1-2014; EN 60079-28-2015; EN 60079-31-2014;
IECEx: IEC 60079-0-2017; IEC 60079-1-2014; IEC 60079-28-2015; IEC 60079-31-2013;

IECEx & ATEX :

• “CAUTION-USEFASTENER WITH YIELD STRESS ≥ 640 MPa”；
• “WARNING – DO NOT OPEN WHEN ENERGIZED”；
• “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”；
• “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”；
• " WARNING - DETAILED TEMPERATURE CLASS - SEE INSTRUCTIONS”；
• “THE FLAMPROOF JOINTS ARE NOT INTENDED TO BE REPAIRED”;
• End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose；
• External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG；
• Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 130℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally. The branch point is 83.6℃ and cable entry point is 69.4℃

Applications

Wastewater treatment，oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.

Warning：

CUL for Hazloc:

• SUITABLE FOR WET LOCATIONS;
• THIS LUMINAIRE IS ACCEPTABLE FOR OPERATION IN AMBIENT CONDITIONS NOT EXCEEDING 50°C;
• FOR SUPPLY CONNECTION, USE WIRES RATED FOR AT LEAST90°C;
• NO SERVICEABLE PARTS” OR “NO USER SERVICEABLE PARTS. DO NOT OPEN FOR CLEANING.;
• CAUTION - ″TO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINAIRE FROM THE SUPPLY CIRCUIT BEFORE OPENING. KEEP TIGHTLY CLOSED WHEN IN OPERATION.″;
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED;
• “CAUTION – RISK OF SHOCK” and “DISCONNECT POWER BEFORE SERVICING”.

Explosion Proof LED High Bay Light - Class 1 Division 2 - 60W 80W

Applications

Wastewater treatment，oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.

Warning：

CUL for Hazloc:

• SUITABLE FOR WET LOCATIONS;
• THIS LUMINAIRE IS ACCEPTABLE FOR OPERATION IN AMBIENT CONDITIONS NOT EXCEEDING 50°C;
• FOR SUPPLY CONNECTION, USE WIRES RATED FOR AT LEAST90°C;
• NO SERVICEABLE PARTS” OR “NO USER SERVICEABLE PARTS. DO NOT OPEN FOR CLEANING.;
• CAUTION - ″TO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINAIRE FROM THE SUPPLY CIRCUIT BEFORE OPENING. KEEP TIGHTLY CLOSED WHEN IN OPERATION.″;
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED;
• “CAUTION – RISK OF SHOCK” and “DISCONNECT POWER BEFORE SERVICING”.

Class 1 Division 2 Explosion Proof LED High Bay Light - 30W 40W

Applications

Wastewater treatment，oil and gas refineries, drilling rigs, petrochemical facilities, food and beverage facilities, tunnels, outdoor wall and stanchion mounted general area lighting, and where flammable vapors, gases, ignitable dusts, fibers or flyings are present.

Warning：

CUL for Hazloc:

• SUITABLE FOR WET LOCATIONS;
• THIS LUMINAIRE IS ACCEPTABLE FOR OPERATION IN AMBIENT CONDITIONS NOT EXCEEDING 50°C;
• FOR SUPPLY CONNECTION, USE WIRES RATED FOR AT LEAST90°C;
• NO SERVICEABLE PARTS” OR “NO USER SERVICEABLE PARTS. DO NOT OPEN FOR CLEANING.;
• CAUTION - ″TO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINAIRE FROM THE SUPPLY CIRCUIT BEFORE OPENING. KEEP TIGHTLY CLOSED WHEN IN OPERATION.″;
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED;
• “CAUTION – RISK OF SHOCK” and “DISCONNECT POWER BEFORE SERVICING”.